Bright Solar MPPT 12/24 30A charge controller with LCD display

-MPPT type charge controller with LCD display. The MPPT controller charges with up to 35% better efficiency than traditional PWM controllers. -The 30A MPPT controller is suitable for 12 V battery systems with max. 360 W panels, and for 24 V battery systems with max. 720 W panels. -MPPT technology automatically adjusts the voltage and current ratio to suit the battery. The efficiency of the operation depends on factors such as the amount of light, temperature and type of solar cells. Optimal operation is constantly monitored by the device’s internal microprocessor, so that the MPPT system always charges the battery as efficiently as possible. When the maximum battery charging voltage is reached, the controller automatically switches off the charging current. The microprocessor also monitors all important protection functions. Technical data: -MPPT technology, providing good efficiency for the solar system -Two inputs for panels -The LCD display shows, among other things, battery voltage, current generated by the panel, actual amperage, etc. -Automatically detects 12/24 V system voltage -Input voltage: 20-60 V / 30-90 V -Temperature-dependent correction of charging parameters -Full electronic protection (polarity protection, over-current, short circuit, overheating, power cut-off, lightning protection, etc.) -Switchable load output -Efficiency ratio: >95% -Battery types: GEL, AGM, WET -Consumption with load: 130 mA, active consumption 15 mA -Protection: IP20 -Mitat (L x S x K): 17,5 x 19,5 x 9,5 cm